Exchange/RJE Manual

Send/Receive Server Messages
Exchange/RJE Messages
A–24 104698 Tandem Computers Incorporated
RJSR17E TIMED OUT WAITING FOR TRANSMISSION FROM HOST
RJSR17* FILE MANAGEMENT SYSTEM ERROR - number
Problem. Exchange/RJE was expecting the remote system to send data, and the
remote system did not send any data to Exchange/RJE within the allowed time. The
operation has been aborted.
Solution. Check the connection and the remote system for problems. Correct any
problems that are found, and try the operation again.
RJSR18F EXCHANGE MICROCODE IS NOT INSTALLED ON CPU number
Problem. The required microcode is not installed.
Solution. Install the required microcode, and then try the operation again.
RJSR19E RECORD SIZE SPECIFIED IN RECEIVE COMMAND
RJSR19* DOES NOT MATCH ACTUAL RECORD SIZE
Problem. The record size specified in the RECEIVE command does not match the
record size of the text received; it must match when transferring transparent text.
Exchange/RJE checks the record size when in standard 2780 mode or when in block
mode with 2780 blocking and the underlying IOP is Envoy. The operation is aborted.
Solution. Specify a record size that matches the actual record size and perform the
operation again.