Exchange/RJE Manual

Send/Receive Server Messages
Exchange/RJE Messages
104698 Tandem Computers Incorporated A–25
RJSR20E RECEIVE OPERATION TERMINATED AFTER SPECIFIED NUMBER OF
RETRIES
RJSR20* RETRIESEOT COUNT ( number) REACHED.
Problem. After receiving an EOT without receiving any text, Exchange/RJE has retried
the read operation the number of times specified by the RETRIESEOT parameter. The
operation is aborted.
Solution. The action to be taken is application dependent. If the remote system sends
EOTs to reset the line because of problems in the line, the line should be checked for
problems. If the remote system sends EOTs to relinquish control, Exchange/RJE can
try the next operation.
RJSR21E RECEIVE OPERATION TERMINATED AFTER SPECIFIED NUMBER OF
RETRIES
RJSR21* RETRIESIDLE COUNT ( number) REACHED.
Problem. After a timeout error has occurred, Exchange/RJE has retried the read
operation the number of times specified by the RETRIESIDLE parameter. The
operation is aborted.
Solution. The action you take depends on your application.
RJSR98F PARAMETER OR BOUNDS ERROR - number
Problem. Parameter or bounds error number number has occurred while calling a
system procedure.
Solution. Contact your local Tandem support office. Note the error number displayed
and the conditions under which the error occurred.
RJSR99F INTERNAL PROGRAM ERROR - number
Problem. An internal program error has occurred.
Solution. Contact your local Tandem support office. Note the number displayed and
the conditions under which the error occurred.