Exchange/RJE Manual

Line Server Messages
Exchange/RJE Messages
A–30 104698 Tandem Computers Incorporated
RJSV18W ILLEGAL PARAMETER NAME keyword , PROCEEDING
Problem. You have entered a command that included an invalid or misspelled
parameter. The Exchange/RJE line server process is continuing.
Solution. Refer to Section 3 for information about the parameters for each command.
Stop the line server, then enter the command again and specify the correct parameter.
RJSV97F FATAL ERROR OCCURRED - LINE SERVER STOPPED
Problem. An error occurred from which the line server is unable to recover. The line
server stops following this error message. This error message is preceded by one or
more error messages that indicate the cause of error.
Solution. Determine the cause of the error by examining the preceding error messages.
Correct the problem, and try the operation again.
RJSV98F TRAP CONDITION DETECTED - LINE SERVER STOPPED
ABNORMALLY
Problem. An internal program error has occurred.
Solution. Contact your local Tandem support office.
RJSV99F INTERNAL PROGRAM ERROR - number
RJSV99* LINE SERVER STOPPED ABNORMALLY
Problem. An internal program error has occurred.
Solution. Contact your local Tandem support office. Note the number displayed and
the conditions under which the error occurred.