Exchange/RJE Manual

DISCONNECT Command
Exchange/RJE Commands
104698 Tandem Computers Incorporated 3–15
If the line server is a named line server, the DISCONNECT command does not stop the
line server. The line server remains available for use until it is stopped. To stop a
named line server, you can use the TACL STOP command. For information about the
STOP command, see the TACL Reference Manual.
Configuration Parameters Changed
The DISCONNECT command resets all configuration parameters (except ACU and
LINE) to their default values. If you follow a DISCONNECT command with a
CONNECT command without first specifying the name of the line server or the
program file from which it should be started, the CONNECT command starts a
temporary line server on the system on which the Exchange/RJE command interpreter
resides.
Example This example shows the DISCONNECT command.
>DISCONNECT
RJCI30 DISCONNECTED FROM LINE SERVER '$Y285'