Exchange/SNA Manual

Exchange/SNA Trace Server Messages
Exchange/SNA Messages
104700 Tandem Computers Incorporated A–5
Solution. Use the SHOW command to verify the values of the configuration
parameters. Correct the values, and enter the CONNECT command again.
SNCI13E $ server IS THE INCORRECT LINE SERVER TYPE.
Problem. You have specified in the NAME configuration parameter the name of a
process other than an Exchange/SNA line server.
Solution. Specify the name of an existing Exchange/SNA line server in the NAME
configuration parameter, or start a new line server.
SNCI14E I/O ERROR ON filename , ERROR number .
Problem. A file-system error (whose error number is number ) occurred while
performing I/O on filename .
Solution. Determine the nature of the file-system error and correct the problem. You
can use the command interpreter ERROR command to see the text associated with the
error number.
SNCI15E CONFIGURATION OF $ server DOES NOT MATCH REQUESTED.
Problem. The current values of the configuration parameters do not match the values
in effect when the line server was started; the connection cannot be established.
Solution. You can change the current values of the configuration parameters to match
the values in effect when the line server was started, you can use another (possibly
new) line server, or you can use the CONNECT command with an exclamation point
(CONNECT !).
SNCI16E CONNECTION TO $ server STILL EXISTS.
SNCI16* ISSUE A 'DISCONNECT' TO BREAK CONNECTION.
Problem. You have entered a CONNECT command while the command interpreter is
still connected to a line server.
Solution. Use the existing line server and connection (if suitable), or enter a
DISCONNECT command and then enter the CONNECT command again.