Exchange/SNA Manual
Exchange/SNA Send/Receive Server Messages
Exchange/SNA Messages
104700 Tandem Computers Incorporated A–21
Send/Receive Server
Messages
This subsection lists the messages issued by the Exchange/SNA send/receive server.
Some of the messages are shown here on two lines even though the messages are
displayed on a single line on your screen.
Some message explanations indicate that you should contact your local Tandem
support office. Before calling the office, please gather the information outlined in the
section “Before Contacting Tandem,” later in this appendix.
SNSR00 FILE
name
IS BEING
sent/received
SNSR00*
to/from
server
AT
hh:mm:ss
ON mm/dd/yy.
Comment. The specified file is being transferred.
SNSR01E CAN'T OPEN FILE -
name
SNSR01* FILE MANAGEMENT SYSTEM ERROR -
number
.
Problem. The send/receive server was unable to open the specified file due to the file-
system error indicated by
number
.
Solution. Correct the cause of the error, and then try the operation again.
SNSR02E INSUFFICIENT STORAGE - SERVER ABORTED.
Problem. There is not enough memory to run the send/receive server.
Solution. Contact your local Tandem support office.
SNSR03E MEMORY MANAGEMENT ERROR - SERVER ABORTED.
Problem. An internal memory management error occurred.
Solution. Contact your local Tandem support office.