Exchange/SNA Manual

Exchange/SNA Send/Receive Server Messages
Exchange/SNA Messages
A–22 104700 Tandem Computers Incorporated
SNSR04E NO CONNECT PARAMETERS PASSED.
Problem. The Exchange/SNA command interpreter did not pass any connection
parameters to the send/receive server.
Solution. Contact your local Tandem support office.
SNSR05E I/O ERROR ON FILE name
SNSR05* FILE MANAGEMENT SYSTEM ERROR - number .
Problem. A file-system error occurred while performing I/O on the specified file. The
error that occurred is indicated by number .
Solution. Correct the indicated error, and try the operation again.
SNSR06W TRUNCATION ERROR IN FILE name
SNSR06* ONE OR MORE RECORDS HAVE BEEN TRUNCATED TO num BYTES.
Problem. One or more records that were received from the remote system are larger
than the record size of the file to which they are being written. The records that are too
large are truncated.
Solution. Perform the operation again, and specify a larger record size for the file to
which the received records are written (or use a different file with a larger record size).
SNSR07 FILE name TRANSMISSION COMPLETE
SNSR07* RECORDS count , SIZE hi : lo : avg , TIME hh : mm : ss , RATE rate
Comment. This message is displayed at the end of each file sent or received.
SNSR08W event HAS OCCURRED ON filename
Comment. The specified event has occurred on the indicated device.