Exchange/SNA Manual

Exchange/SNA Line Server Messages
Exchange/SNA Messages
104700 Tandem Computers Incorporated A–27
SNSV02F INSUFFICIENT STORAGE
SNSV02* LINE SERVER TERMINATED
Problem. There is not enough memory to run the Exchange/SNA line server. This
message may occur because you have configured too many subdevices for the line.
Solution. Use a configuration with fewer subdevices. If this does not solve the
problem, contact your local Tandem support office.
SNSV03F MEMORY MANAGEMENT ERROR
SNSV03* LINE SERVER TERMINATED
Problem. There is not enough memory to run the Exchange/SNA line server.
Solution. Contact your local Tandem support office.
SNSV04F NO CONFIGURATION DATA PASSED
SNSV04* LINE SERVER TERMINATED
Problem. No configuration information was passed to the line server.
Solution. Check to see if the Exchange/SNA command interpreter is still running. If it
is not running, start the command interpreter again. Otherwise, contact your local
Tandem support office.
SNSV05E I/O ERROR ON FILE filename
SNSV05* FILE MANAGEMENT SYSTEM ERROR number
Problem. An I/O error occurred on the specified file. The error is indicated by
number . Note that if the error number is from 512 to 767, the error is a spooler error.
To determine the underlying file-system error, subtract 512 from the error number.
The result is the file-system error number. For example, spooler error number 557 is
due to file-system error 45 (557-512), which is a file full error (the spooler data file is
full).
Solution. Correct the error, and try the operation again.