Exchange/SNA Manual

Exchange/SNA Line Server Messages
Exchange/SNA Messages
104700 Tandem Computers Incorporated A–29
SNSV11F EXCHANGE MICROCODE IS NOT INSTALLED ON CPU number
SNSV11* LINE SERVER TERMINATED
Problem. The microcode required by Exchange/SNA is not installed.
Solution. Install the required microcode and run Exchange/SNA again, or run
Exchange/SNA on a processor that has the required microcode.
SNSV12 CLOSE PROCESSING HAS BEEN COMPLETED
SNSV12* FILE - filename
Comment. The processing required to close the specified file has finished.
SNSV13W SHUTDOWN PENDING TRACE TERMINATION
Problem. The line server cannot complete the shutdown because the trace server is still
active.
Solution. Use the TRACE command to stop the trace server.
SNSV14 ALL AVAILABLE LOGICAL UNITS CLOSED
SNSV14* LINE SERVER TERMINATED
Comment. All LUs used by Exchange/SNA have been closed, and the line server has
been stopped.
SNSV15F EXCHANGE WILL NOT RUN ON NONSTOP SYSTEM
SNSV15* LINE SERVER TERMINATED
Problem. The Exchange/SNA line server requires a processor with extended memory.
Solution. Run the Exchange/SNA line server on a processor with extended memory.