Exchange/SNA Manual

Exchange/SNA Line Server Messages
Exchange/SNA Messages
A–34 104700 Tandem Computers Incorporated
SNSV58F TRAP CODE number AT OCTAL LOCATION location
SNSV58* LINE SERVER TERMINATED ABNORMALLY
Problem. A critical error condition occurred during the running of this process. number
is the trap code number and location is the octal offset within SNAXSV where the trap
occurred.
Solution. See the Guardian Programmer’s Guide for detailed information on trap
handling. Save the SAVEABEND file and contact your local Tandem support office.
SNSV59 A HOST REQUEST FOR ANY PRINTER HAS BEEN ASSIGNED TO
subdevice
Comment. A request for any available printer has been received from the host. The
request has been assigned to the specified printer subdevice.
SNSV60 A HOST REQUEST FOR ANY PUNCH HAS BEEN ASSIGNED TO
subdevice
Comment. A request for any available card punch has been received from the host. The
request has been assigned to the specified punch subdevice.
SNSV61F UNEXPECTED GUARDIAN INTERNAL ERROR - nnn
SNSV61* LINE SERVER TERMINATED
Problem. A file system call has returned the error. It creates a ZZSAnnnn
SAVEABEND file and causes the line server process to terminate.
Solution. Save the ZZSAnnnn file and contact your local Tandem support office.
SNSV62F CLEANUP HAS BEEN RECEIVED FROM HOST
SNSV62* FILE - filename
Comment. A CLEANUP request has been received from the host. If an operation is in
progress over the LU-LU session specified in the CLEANUP request, that operation is
aborted. The LU is taken out of service.