Exchange/SNA Manual

Exchange/SNA BIND Parameters
C–2 104700 Tandem Computers Incorporated
Table C-1. Exchange/SNA BIND Requirements (Page 2 of 6)
Offset Field Description
05 FM Usage SLU Protocol
0....... Only single RU chains allowed.
1....... Multiple RU chains allowed.
.0...... Immediate-request mode.
..01.... Exception-response mode.
..10.... Definite-response mode.
..11.... Exception- response or definite-response mode.
....00.. (reserved)
......0. Compression not used by secondary.
......1. Compression used by secondary.
.......1 Secondary can send EB.
06 FM Usage Common Protocol
0....000 (reserved)
.1...... FM headers are allowed.
..1..... Brackets are used.
...1.... Bracket termination rule 1 used.
....0... Alternate code set not used.
....1... Alternate code set can be used.
07 FM Usage Common Protocol
10...... Half-duplex flip-flop mode.
..0..... Contention loser responsible for error recovery (see bit 3).
...0.... Contention winner (first speaker) is secondary.
....000. (reserved)
.......0 If HDX-FF, secondary sends data first .
If HDX-contention, secondary wins contention.
08 TS Usage Secondary Pacing
0....... One-stage pacing used.
1....... Two-stage pacing used.
.0...... (reserved)
..000 nnn Secondary send pacing count.
09 TS Usage Secondary Pacing
00...... (reserved)
..000 nnn Secondary receive pacing count.