Exchange/SNA Manual

Exchange/SNA BIND Parameters
104700 Tandem Computers Incorporated C–3
Table C-1. Exchange/SNA BIND Requirements (Page 3 of 6)
Offset Field Description
10 TS Usage Secondary RU Size
%H85 Secondary maximum RU size specification (256 bytes).
or
%H86 Secondary maximum RU size specification (512 bytes).
11 TS Usage Primary RU Size
%H85 Primary maximum RU size specification (256 bytes).
or
%H86 Primary maximum RU size specification (512 bytes).
12 TS Usage Primary Pacing
0....... Two-stage pacing used.
1....... One-stage pacing used.
.0...... (reserved)
..000 nnn Primary send pacing count.
13 TS Usage Primary Pacing
00...... (reserved)
..000 nnn Primary receive pacing count (for one-stage pacing, this is the same
as byte 8, bits 2 to 7).
14 PS Usage LU Profile
0....... PS usage basic format.
.0000001 LU type 1.
15 PS Usage FM Header Sets
0001.... FM header type 1 subset.
....0000 Card data cannot span RUs.
....0001 Card data can span RUs.
16 PLU Usage FMH Flags
0....... Two destinations outstanding.
.0...... Compacted data must not be sent.
.1...... Compacted data can be sent.
..0..... PDIR not allowed.
...00000 (reserved)
17 PLU Usage FMH Flags
00000000 (reserved)