Exchange/SNA Manual

Exchange/SNA BIND Parameters
C–4 104700 Tandem Computers Incorporated
Table C-1. Exchange/SNA BIND Requirements (Page 4 of 6)
Offset Field Description
18 PLU Usage Data Stream Flags
0....... BS, CR, INP, ENP, LF, HT, and VT must not be sent.
1....... BS, CR, INP, ENP, LF, HT, and VT can be sent.
.0...... SHF must not be sent.
.1...... SHF can be sent.
..0..... SVF must not be sent.
..1..... SVF can be sent.
...0.... SVF (Chan) and SEL must not be sent.
...1.... SVF (Chan) and SEL can be sent.
....0... SLD must not be sent.
....1... SLD can be sent.
.....0.. (reserved)
......0. BEL must be sent.
......1. BEL can be sent.
.......0 TRN and IRS are not used.
.......1 TRN and IRS can be used.
19 PLU Usage Data Stream Flags
0....... SLU initiates attended mode.
.0...... SLU does not switch from attended to unattended mode.
..000000 (reserved)
20 PLU Usage Media Flags
0....... Document output must not be sent.
1....... Document output can be sent.
.0...... Card format not allowed.
.1...... Card format allowed.
..0..... Exchange media unsupported.
...0.... Disk data management unsupported.
....0... Extended card unsupported.
.....0.. Extended document unsupported.
......0. SLU can send CD every EDS.
.......0 (reserved)