Exchange/SNA Manual

RECEIVE Command
Exchange/SNA Commands
3–40 104700 Tandem Computers Incorporated
3. This example shows the timeout value set to 45 seconds using the SET
ENDTIMED parameter, and then a RECEIVE command with the END TIMED
parameter (which receives files from the host system until 45 seconds elapse
without a file being sent by the host system):
>set endtimed 45
>receive $s.#pr1:#pr1, recsize 132, end timed
SNCI61 RECEIVE SERVER '$Y391' ( 3,113) HAS BEEN CREATED
SNSR00 FILE '$S.#PR1'(SPOOLER) IS BEING RECEIVED
SNSR00* FROM '$SNL5.#PR1'(SNAXSV) AT 16:16:18 ON 6/05/91
SNSR08W END-OF-FILE HAS OCCURRED ON '$SNL5.#PR1'
SNSR07 FILE '$S.#PR1' TRANSMISSION COMPLETE
SNSR07* RECORDS 7, SIZE 131: 1: 63, TIME 0:00:00, RATE 700.0
SNSR08W END-OF-FILE HAS OCCURRED ON '$SNL5.#PR1'
SNSR07 FILE '$S.#PR1' TRANSMISSION COMPLETE
SNSR07* RECORDS 319, SIZE 107: 23: 64, TIME 0:00:36, RATE 8.6
SNSR09 SERVER TERMINATED DUE TO TIMED REQUEST
SNSR08W ABORT HAS OCCURRED ON '$SNL5.#PR1'
SNCI57W RECEIVE SERVER '$Y391' HAS STOPPED