Expand Configuration and Management Manual (G06.24+)

Contents
Expand Configuration and Management Manual523347-008
viii
11. Configuring Expand-Over-SNA
Lines (continued)
11. Configuring Expand-Over-SNA Lines (continued)
Topology Considerations 11-5
Summary of Configuration Steps 11-7
Step 1: Add the SNAX/APN Line 11-8
Considerations 11-8
Step 2: Add the LUs for the SNAX/APN Line 11-8
Considerations 11-9
Example 11-9
Step 3: Start the SNAX/APN Line 11-11
Step 4: Create a Profile for the Expand-Over-SNA Line-Handler Process 11-11
ADD Profile Command 11-11
Example 11-12
Step 5: Create the Expand-Over-SNA Line-Handler Process 11-12
ADD DEVICE Command 11-12
Considerations 11-14
Examples 11-14
Step 6: Start the Expand-Over-SNA Line-Handler Process 11-15
Step 7: Start the Expand-Over-SNA Line 11-15
Profile Modifiers 11-16
Recommended Modifiers 11-16
Modifiers for Special Features 11-16
PEXQSNAM Modifiers 11-17
12. Configuring Expand-Over-ServerNet Lines
Required Hardware and Software 12-1
Expand Manager Process ($ZEXP) 12-2
External System Area Network Manager (SANMAN) 12-2
Message Monitor Process (MSGMON) 12-2
Modular ServerNet Expansion Boards (MSEBs) 12-3
Network Access Method (NAM) 12-3
Network Control Process ($NCP) 12-3
Cluster Switch 12-3
Profile Products 12-3
ServerNet Cluster Monitor Process ($ZZSCL) 12-4
ServerNet Cluster Product 12-4
Wide Area Network (WAN) Subsystem 12-4
X and Y Fabrics 12-5
Topology Considerations 12-6
Summary of Configuration Steps 12-7