Expand Configuration and Management Manual (G06.24+)

Contents
Expand Configuration and Management Manual—523347-008
ix
12. Configuring Expand-Over-ServerNet
Lines (continued)
12. Configuring Expand-Over-ServerNet Lines (continued)
Configuring a ServerNet Node 12-7
Step 1: Create a Profile for the Expand-Over-ServerNet Line-Handler Process 12-7
ADD Profile Command 12-8
Step 2: Create a Device for the Expand-Over-ServerNet Line-Handler Process 12-9
ADD DEVICE Command 12-9
Considerations 12-11
Example 12-11
Step 3: Start the Expand-Over-ServerNet Line-Handler Processes 12-12
Example 12-12
Step 4: Start the Expand-Over-ServerNet Lines 12-12
Profile Modifiers 12-13
Modifiers for Special Features 12-13
PEXPSSN Modifiers 12-13
13. Configuring Expand-Over-FOX Lines
Required Hardware and Software 13-1
FOX Monitor Process ($ZZFOX) 13-2
$ZZFOX.#X and $ZZFOX.#Y 13-2
FOX Driver 13-2
ServerNet/FX Adapters 13-2
Wide Area Network (WAN) Subsystem 13-2
Topology Considerations 13-3
Summary of Configuration Steps 13-4
Step 1: Create a Profile for the Expand-Over-FOX Line-Handler Process 13-4
ADD Profile Command 13-4
Step 2: Create a Device for the Expand-Over-FOX Line-Handler Process 13-5
ADD DEVICE Command 13-6
Considerations 13-7
Example 13-7
Step 3: Start the Expand-Over-FOX Line-Handler Processes 13-8
Step 4: Start the Expand-Over-FOX Lines 13-8
Profile Modifiers 13-8
Modifiers for Special Features 13-9
PEXQSFX Modifiers 13-9