Expand Configuration and Management Manual (G06.24+)

ManualsBrandsHP ManualsServerHP NonStop G-Series

111

112

113

114

115

116

117

118

119

120

Configuration Overview

Expand Configuration and Management Manual—523347-008

5-3

Creating a Profile

A profile template is a disk file that contains modifiers and default modifier values. HP

provides profile templates for the network control process ($NCP) and for the different

types of Expand line-handler processes.

Table 5-2 lists the profile templates for the Expand subsystem. These profile templates

are installed in $SYSTEM.SYSnn. The modifiers in each profile template are described

in the sections listed in Table 5-1. A comprehensive list of all the Expand modifiers is

provided in Section 17, Expand Modifiers.

You can create a profile from one of the profile templates listed in Table 5-2, from a

previously created profile, or you can create your own profile. You create a profile

using the WAN subsystem SCF ADD PROFILE command. This command allows you

to specify the modifiers and modifier values that will be contained in the profile you are

creating. You can display the contents of a specific profile using the WAN subsystem

SCF INFO PROFILE command.

For more information about WAN subsystem SCF commands, refer to the WAN

Subsystem Configuration and Management Manual.

Table 5-2. Expand Profile Templates

Disk

Filename Description

Device Type and

Subtype

PEXPNCP Network control process modifiers 62,6

PEXQSSWN Direct-connect modifiers (single-line) 63,5

PEXQMSWN Direct-connect modifiers (line-logical device) 63,6

PEXQSSAT Satellite-connect modifiers (single-line) 63,5

PEXQMSAT Satellite-connect modifiers (line-logical device) 63,6

PEXQSNAM Expand-over-NAM modifiers (single-line) 63,0

PEXQMNAM Expand-over-NAM modifiers (line-logical device) 63,2

PEXQSIP Expand-over-IP modifiers (single-line) 63,0

PEXQMIP Expand-over-IP modifiers (line-logical device) 63,2

PEXQSATM Expand-over-ATM modifiers (single-line) 63,0

PEXQMATM Expand-over-ATM modifiers (line-logical device) 63,2

PEXPPATH Path logical device modifiers 63,1

PEXPSSN Expand-over-ServerNet modifiers 63,4

PEXQSFX Expand-over-FOX modifiers 63,3