Expand Configuration and Management Manual (G06.24+)

Contents

Expand Configuration and Management Manual—523347-008

14. Configuring Multi-Line Paths

Configuration Overview 14-1

Configuration Considerations 14-2

Summary of Configuration Steps 14-2

Step 1: Create a Profile for the Path-Logical Device 14-3

ADD PROFILE Command 14-3

Step 2: Create a Profile for Each Line Type 14-4

ADD PROFILE Command 14-4

Step 3: Create a Path-Logical Device 14-5

ADD DEVICE Command 14-5

Considerations 14-7

Step 4: Create the Line-Logical Devices 14-7

ADD DEVICE Command 14-7

Considerations 14-12

Step 5: Start the Path-Logical Device 14-13

Step 6: Start the Lines 14-13

Starting Specific Lines 14-13

Configuration Example 14-14

Path-Logical Device Modifiers 14-15

Modifiers for Special Features 14-15

PEXPPATH Modifiers 14-15

Line-Logical Device Modifiers 14-16

X25AM Process Modifiers 14-16

PEXQMSWN and PEXQMSAT Modifiers 14-17

PEXQMNAM Modifiers 14-18

PEXQMIP Modifiers 14-19

PEXQMATM Modifiers 14-21

Part III. Subsystem Control Facility (SCF)

15. Subsystem Control Facility (SCF) Commands

Overview of the Expand Subsystem SCF Interface 15-2

Expand Subsystem Objects 15-2

Object States 15-4

SCF Commands and Objects 15-5

Sensitive and Nonsensitive Commands 15-5

Wild-Card Support 15-6

Time Values 15-6