Expand Configuration and Management Manual (G06.24+)

Configuring Direct-Connect and Satellite-Connect
Lines
Expand Configuration and Management Manual—523347-008
7-7
Step 2: Create a Profile for the Line-Handler Process
For more information about configuring and managing SWAN concentrators, refer to
the WAN Subsystem Configuration and Management Manual.
Step 2: Create a Profile for the Line-Handler
Process
You can create a profile for a single-line direct-connect line-handler process using the
PEXQSSWN profile. You can create a profile for a single-line satellite-connect
line-handler process using the PEXQSSAT profile. Both profiles are provided in the
$SYSTEM.SYSnn subvolume. You can also create a new profile from an existing
profile, or you can create your own profile. For complete information about profiles,
refer to the WAN Subsystem Configuration and Management Manual.
Example 7-1. SCF STATUS ADAPTER Command
-> status adapter $zzwan.#*, sub all
WAN Manager STATUS ADAPTER for ADAPTER \NODEA.$ZZWAN.#S01
State........... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \NODEA.$ZZWAN.#S01.1
State :......... STARTED
Path A..........: CONFIGURED
Path B..........: CONFIGURED
Number of lines. 2
Line............ 0 : $X25A
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \NODEA.$ZZWAN.#S01.1.A
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H000000000000
WAN Manager STATUS PATH for PATH \NODEA.$ZZWAN.#S01.1.B
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H000000000000