Expand Configuration and Management Manual (G06.24+)
Configuring Expand-Over-IP Lines
Expand Configuration and Management Manual—523347-008
8-9
Step 1 (A): Select a Process and SUBNET for
NonStop TCP/IP Use
Step 1 (A): Select a Process and SUBNET for
NonStop TCP/IP Use
A NonStop TCP/IP SUBNET associates a NonStop TCP/IP process with a connection
to a network and an IP address.
Select a NonStop TCP/IP Process
The NonStop TCP/IP process provides access to the NonStop TCP/IP environment. In
configuring Expand-over-IP for this environment, you will be using the name of a
NonStop TCP/IP process for the ASSOCIATEDEV modifier in Step 4: Create the Line-
Handler Process.
To obtain a list of running NonStop TCP/IP processes, issue the following command:
> LISTDEV TCPIP
The SCF LISTDEV command lists all the TCP/IP processes. A program name in the
SCF LISTDEV display of TCPIP means that it's a NonStop TCP/IP process.
Example 8-3 shows a sample result of the SCF LISTDEV TCPIP command.
In the above example, the processes $ZB01A, $ZTCO, and $ZB019 are NonStop
TCP/IP processes. For the rest of this procedure, we will use $ZB01A as our NonStop
TCP/IP process.
Select a SUBNET for NonStop TCP/IP
You can use the SCF INFO SUBNET command to determine if a SUBNET has been
configured for the NonStop TCP/IP process you plan to associate with the Expand-
over-IP line-handler process. Example 8-2 shows an example of an SCF INFO
SUBNET command for a NonStop TCP/IP process named $ZTC01.
Note. The following instructions assume that a NonStop TCP/IP process has already been
created. For information about creating NonStop TCP/IP processes, refer to the TCP/IP
Configuration and Management Manual.
Example 8-1. SCF LISTDEV TCPIP Command
1 SCF - T9082G02 - (05AUT99) (26JUL99) - 12/22/1999 14:52:00 System \NODEA
2 Copyright Hewlett-Packard Company
3
4 LDev Name PPID BPID Type RSize Pri Program
5 107 $ZB01A 0,285 1,287 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP
7 154 $ZTC0 0,299 1,286 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP
8 158 $ZB019 1,293 0,302 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP
Step 1 (A): Select a Process and SUBNET for
NonStop TCP/IP Use
A NonStop TCP/IP SUBNET associates a NonStop TCP/IP process with a connection
to a network and an IP address.
Select a NonStop TCP/IP Process
The NonStop TCP/IP process provides access to the NonStop TCP/IP environment. In
configuring Expand-over-IP for this environment, you will be using the name of a
NonStop TCP/IP process for the ASSOCIATEDEV modifier in Step 4: Create the Line-
Handler Process.
To obtain a list of running NonStop TCP/IP processes, issue the following command:
> LISTDEV TCPIP
The SCF LISTDEV command lists all the TCP/IP processes. A program name in the
SCF LISTDEV display of TCPIP means that it's a NonStop TCP/IP process.
Example 8-3 shows a sample result of the SCF LISTDEV TCPIP command.
In the above example, the processes $ZB01A, $ZTCO, and $ZB019 are NonStop
TCP/IP processes. For the rest of this procedure, we will use $ZB01A as our NonStop
TCP/IP process.
Select a SUBNET for NonStop TCP/IP
You can use the SCF INFO SUBNET command to determine if a SUBNET has been
configured for the NonStop TCP/IP process you plan to associate with the Expand-
over-IP line-handler process. Example 8-2 shows an example of an SCF INFO
SUBNET command for a NonStop TCP/IP process named $ZTC01.
Note. The following instructions assume that a NonStop TCP/IP process has already been
created. For information about creating NonStop TCP/IP processes, refer to the TCP/IP
Configuration and Management Manual.
Example 8-1. SCF LISTDEV TCPIP Command
1 SCF - T9082G02 - (05AUT99) (26JUL99) - 12/22/1999 14:52:00 System \NODEA
2 Copyright Hewlett-Packard Company
3
4 LDev Name PPID BPID Type RSize Pri Program
5 107 $ZB01A 0,285 1,287 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP
7 154 $ZTC0 0,299 1,286 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP
8 158 $ZB019 1,293 0,302 (48,0) 32000 200 \NODEA.$SYSTEM.3.TCPIP