Expand Configuration and Management Manual (G06.24+)
Configuring Expand-Over-IP Lines
Expand Configuration and Management Manual—523347-008
8-31
PEXQSIP Modifiers
RETRYPROBE 19 1 through 255
RXWINDOW 7 2 through 15
SPEED 0 0 through 224000
SPEEDK NOT_SET 0 through 4,000,000,000
SRCIPADDR
2
0.0.0.0 Any 36-character string
SRCIPPORT
1
1024 0 through 65534
STARTUP_OFF 3
STARTUP_ON
SUPERPATH_OFF 3
SUPERPATH_ON
TIMERINACTIVITY 0 (no timer) 0 through 32767
TIMERPROBE 1 1 through 32767
TIMERRECONNECT 30 30 through 32767
TXWINDOW 7 2 through 25
V6DESTIPADDR 0000:0000:0000:
0000:0000:0000:
0000:0000
Any 45-character string
V6SRCIPADDR 0000:0000:0000:
0000:0000:0000:
0000:0000
Any 45-character string
1. This is a required modifier.
2. This is a required modifier. See the TCP/IPv6 Configuration and Management Manual for IP address syntax.
3. This is a required modifier. The default value is invalid and must be changed.
4. The maximum value is actually 9180, but for performance it is best to use whole multiples of 32, which would
result in a 9152 maximum.
Table 8-1. PEXQSIP Modifiers for Expand-over-IP Lines (page 2 of 2)
Modifier Default Value Range of Values