Expand Configuration and Management Manual (G06.24+)
Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual—523347-008
9-2
Required Hardware and Software
Required Hardware and Software
Several hardware and software components are required in addition to the Expand-
over-ATM line-handler process to provide Expand-over-ATM connectivity. These
components are illustrated in Figure 9-1 and are explained in the following
subsections.
QIO Subsystem
QIO is a mechanism for transferring data between processes through a shared
memory segment. The QIO subsystem is preconfigured and started during the system
load sequence. The QIO subsystem must be started and running before Expand
line-handler processes can be started.
Refer to Shared Memory Area for QIO on page 18-48 for information on QIO
enhancements that enable you to have more control over certain aspects of memory
management. For information about the QIO subsystem, refer to the QIO Configuration
and Management Manual.
Figure 9-1. Expand-Over-ATM Connectivity Components
055CDT .CDD
Processor
Y-Fabric
X-Fabric
QIO
Shared
Memory
Segment
ATM3SA
ATM Subsystem or
SLSA Subsystem
Expand-Over-ATM
Line-Handler
Process