Expand Configuration and Management Manual (G06.24+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual—523347-008
9-7
Configuring an Expand Line-Handler Process That
Uses an SVC
your local and remote Expand-over-ATM line-handler processes. Specifying a selector
byte when configuring an Expand-over-ATM line-handler process is described in Step
3: Create the Line-Handler Process.
Identifying the ATM Address Configured for the Remote ATM
Line
You can use the ATM subsystem SCF INFO LINE command with the DETAIL option to
display the ATM address configured for the ATM line that will be used by the Expand-
over-ATM line-handler process at the remote system.
Example 9-2 shows an example of an ATM subsystem SCF INFO LINE command with
the DETAIL option for an ATM line named $AM1 on the remote system \NODEA.
The ATM address is shown in the ATMADDR (configured ATM address) field. As
shown in Example 9-2, the 20-byte hexadecimal ATM address configured for line
$AM1 is as follows:
47000580FFE1000000F21A29EB0000000001B300
You must replace the last byte of this ATM address with the selector byte you obtained
for the remote ATM line when specifying the ATM address during Expand-over-ATM
line-handler configuration. For example, if the selector byte you obtained is %H81, then
you would specify the following ATM address during Expand-over-ATM line-handler
configuration:
47000580FFE1000000F21A29EB0000000001B381
Example 9-2. ATM Subsystem SCF INFO LINE, DETAIL Command
3-> INFO LINE $AM1, DETAIL
ATM Detailed Info LINE \NODEA.$AM1
*ATMADDR................. ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 01 B3 00H
Registered Atm Address... ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 01 B3 00H
*UNIVERSION.............. 3.0
UME
*UMECOMMUNITY............
*UMEVPI. ................ 1 *UMEVCI................... 16
*MAXPVCVPI............... 100 *MAXPVCVCI...... ......... 100
PHYSICAL LAYER
Phys Layer Media Type.... MULTIMODE Phys Layer Xmit Type .... SONET
ATM LAYER
*MAXVPCS................. 100 *MAXVCCS.................. 1000
*MAXVPIBITS.............. 8 *MAXVCIBITS............... 10
*UNIPORTTYPE............. PRIVATE