Expand Configuration and Management Manual (G06.24+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual—523347-008
9-13
ADD DEVICE Command
Syntax for SVC Connections
Use the following command syntax if the Expand-over-ATM line-handler process will
use an SVC connection:
Syntax for ATMSAP Connections
Use the following command syntax if the Expand-over-ATM line-handler process will
use an ATMSAP connection:
$ZZWAN.#device_name
specifies, via the WAN subsystem, the device name of the Expand line-handler
process to add.
IOPOBJECT $SYSTEM.SYSnn.LHOBJ
is the name of the object file containing the executable object for code for an
Expand line-handler process. This value must be $SYSTEM.SYSnn.LHOBJ.
PROFILE profile_name
is the name of the profile you created for this Expand line-handler process in Step
2: Create a Profile for the Line-Handler Process.
ADD DEVICE $ZZWAN.#device_name
, IOPOBJECT $SYSTEM.SYSTEM.LHOBJ
, PROFILE profile_name
, CPU cpunumber
, ALTCPU altcpunumber
, TYPE (63,0 )
, RSIZE rsize
, ASSOCIATEDEV $atm_line
, ASSOCIATESUBDEV #IP
, CALLTYPE_SVC
, ATMSEL selector-byte
, DESTATMADDR (ISONSAP:%Hatm-address)
, NEXTSYS sys_number
[, modifier_keyword [ modifier_value ] ] ...
ADD DEVICE $ZZWAN.#device_name
, IOPOBJECT $SYSTEM.SYSTEM.LHOBJ
, PROFILE profile_name
, CPU cpunumber
, ALTCPU altcpunumber
, TYPE (63,0 )
, RSIZE rsize
, CALLTYPE_ATMSAP
, LIFNAME lif_name
, NEXTSYS sys_number
[, modifier_keyword [ modifier_value ] ] ...