Expand Configuration and Management Manual (G06.24+)

Configuring Expand-Over-ATM Lines
Expand Configuration and Management Manual—523347-008
9-19
Modifiers for Special Features
Modifiers for Special Features
In addition to the L4CONGCTRL_ON and PATHPACKETBYTES modifiers, the
SUPERPATH_ON modifier is provided in the PEXQSATM profile to enable you to
configure the Expand multi-CPU feature.
For configuration considerations for all special features, refer to Section 18, Subsystem
Description. For information about the advantages and disadvantages of each feature,
refer to Section 3, Planning a Network Design.
The PATHBLOCKBYTES, PATHPACKETBYTES, L4CONGCTRL_ON, and
SUPERPATH_ON modifiers are described in detail in Section 17, Expand Modifiers.
PEXQSATM Modifiers
The disk file $SYSTEM.SYSnn.PEXQSATM defines modifiers for single-line Expand-
over-ATM line-handler processes.
Table 9-1 lists the default value and range of values for each modifier in this profile, if
applicable. For modifiers that are mutually exclusive, a check mark (3) is shown in the
“Default Value” column to indicate which modifier is present in the profile by default.
For a complete description of the modifiers listed in this table, refer to Section 17,
Expand Modifiers.
Table 9-1. PEXQSATM Modifiers for Expand-over-ATM Lines (page 1 of 3)
Modifier Default Value Range of Values
AFTERMAXRETRIES_DOWN
AFTERMAXRETRIES_PASSIVE 3
ASSOCIATEDEV
1
None Any 8-character string
ATMSEL
2
%H80 0 through %HFF
CALLTYPE_PVC
3
3
CALLTYPE_SVC
2
CALLTYPE_ATMSAP
4
COMPRESS_OFF
7
COMPRESS_ON 3
CONNECTTYPE_ACTIVEANDPASSIVE 3
CONNECTTYPE_PASSIVE
DESTATMADDR
2
(ISONSAP:
%H00...)
Any valid 20-byte ISO
NSAP ATM address
DOWNIFBADQUALITY_ON
DOWNIFBADQUALITY_OFF 3
EXTMEMSIZE 2048 0 through 32767
FRAMESIZE 132 64 through 2047