Expand Configuration and Management Manual (G06.24+)

Configuring Expand-Over-X.25 Lines
Expand Configuration and Management Manual—523347-008
10-11
ADD DEVICE Command
ALTCPU altcpunumber
indicates the processor where the backup Expand line-handler process will
normally execute.
TYPE (63,0)
is the device type and subtype for this Expand line-handler process. The device
type is always 63 for Expand line-handler processes. The subtype is 0 for single-
line Expand-over-X.25 line-handler processes.
RSIZE rsize
specifies the time factor of the line for the Expand routing algorithm. RSIZE can be
0 if the time factor is set using some other modifier.
ASSOCIATEDEV nam_process
specifies the device name of the X25AM line-handler process you want to
associate with this Expand-over-X.25 line-handler process.
ASSOCIATESUBDEV subdevice
is a required modifier that specifies the name of the X25AM subdevice to which the
Expand-over-X.25 line-handler process will bind. subdevice is a NAM subdevice
defined for the X25AM line used by the Expand-over-X.25 line-handler process.
Adding a subdevice is explained in Step 1: Add a NAM Subdevice to the X25AM
Line on page 10-7.
NEXTSYS sys_number
is a required modifier that specifies the number (from 0 to 254) of the system
connected to the other end of the line. If you do not specify NEXTSYS, this
modifier defaults to an invalid value (255), and an operator message occurs during
the initialization of the Expand-over-X.25 line-handler process. The path will not be
operational until you alter NEXTSYS to a valid value using either the WAN
subsystem SCF ALTER DEVICE command, or the Expand subsystem SCF ALTER
PATH command.
modifier_keyword
is the name of an optional modifier in profile_name. modifier_keyword is
added to the device record for this Expand line-handler process.
Modifier names in the PEXQSNAM profile are listed in Profile Modifiers on
page 10-13.
modifier_value
is the value you want to assign to the optional modifier specified by
modifier_keyword. modifier_value assigns a value to modifier_keyword
in the device record for this Expand line-handler process.