Expand Configuration and Management Manual (G06.24+)

Contents
Expand Configuration and Management Manual—523347-008
xxi
B. Moving to G-Series Systems (continued)
B. Moving to G-Series Systems (continued)
Dynamic Configuration and Management B-6
SCF Replaces PUP and COUP B-6
System Name and System Number Attributes B-7
EMS Event Messages B-7
Viewing Event Logs B-7
Viewing Logs on a System Running a Different RVU B-7
Event Message Changes B-7
C. Expand and WAN SCF Comparison
Command Comparison C-1
ALTER Command Comparison C-7
Modifier-to-Attribute Comparison C-7
Altering Timeout Periods C-8
Glossary
Index
Examples
Example 1-1. SCF STATUS ADAPTER Command 1-7
Example 1-2. SCF INFO ADAPTER Command 1-8
Example 1-3. SCF STATUS PROCESS Command 1-9
Example 6-1. SCF STATUS $NCP Command 6-4
Example 7-1. SCF STATUS ADAPTER Command 7-7
Example 8-1. SCF LISTDEV TCPIP Command 8-9
Example 8-1. SCF LISTDEV TCPIP Command 8-9
Example 8-2. SCF INFO SUBNET Command 8-10
Example 8-3.
SCF LISTDEV TCPIP Command 8-11
Example 8-4.
SCF INFO SUBNET Command for TCPSAM 8-12
Example 8-5. SCF INFO SUBNET, DETAIL Command 8-14
Example 8-6. SCF LISTDEV TCPIP Command 8-15
Example 8-7. SCF STATUS PROCESS Command 8-17
Example 8-8. SCF STATUS PROCESS Command for TCPSAM 8-18
Example 8-9. SCF STATUS MON Command 8-19
Example 8-10. \NodeB: Configure an Expand-over-TCP/IPv6 Line Using Configured-
Tunnel 8-26
Example 8-11. Add an Expand Line to \NodeC 8-27
Example 8-12. \NodeC: Configure an Expand-over-NonStop TCP/IPv6 Line Using
Configured-Tunnel 8-27