Expand Configuration and Management Manual (G06.24+)

Configuring Multi-Line Paths
Expand Configuration and Management Manual—523347-008
14-8
ADD DEVICE Command
PROFILE profile_name
is the name of the profile you created for this type of line in Step 2: Create a Profile
for Each Line Type.
CPU cpunumber
is the processor number where the line-logical device will normally execute.
ALTCPU altcpunumber
is the processor number where the backup line-logical device will normally
execute.
TYPE devsubtype
is the device subtype for this line-logical device. The device subtypes for line-
logical devices are listed in Table 14-2.
RSIZE rsize
specifies the time factor of the line for the Expand routing algorithm. RSIZE can be
0 if the time factor is set using some other modifier.
MULTI path_name
is the name of the path-logical device you want to associate with this line. (You
created a path-logical device in Step 3: Create a Path-Logical Device.)
required_modifier modifier_value
is the name of a required modifier and its associated value in profile_name.
required_modifier and modifier_value are added to the device record for
this line-logical device.
Table 14-2. Device Subtypes for Line-Logical Devices
Type of Line-Logical Device Subtype Profile Disk Filename
Direct-connect 6 PEXQMSWN
Satellite-connect 6 PEXQMSAT
Expand-over-NAM 2 PEXQMNAM
Expand-over-IP 2 PEXQMIP
Expand-over-ATM 2 PEXQMATM