Expand Configuration and Management Manual (G06.24+)

Configuring Multi-Line Paths
Expand Configuration and Management Manual—523347-008
14-12
Considerations
ATMSEL selector_byte
is a hexadecimal selector byte for the ATM line used by this Expand-over-ATM line-
handler process. Obtaining selector bytes is described in Obtaining Selector Bytes
for the Local and Remote ATM Lines on page 9-6.
This modifier is only applicable to Expand-over-ATM line-handler processes that
use SVC connections.
DESTATMADDR (ISONSAP:%Hatm_address)
is the 20-byte ATM address configured for the ATM line used by the Expand-over-
ATM line-handler process at the remote system. The address must be preceded by
the characters ISONSAP:%H and must be enclosed in parentheses. For example:
(ISONSAP:%H47000580FFE1000000F21A29EB0000000001B300)
Identifying ATM addresses is described in Identifying the ATM Address Configured
for the Remote ATM Line on page 9-7.
This modifier is only applicable to Expand-over-ATM line-handler processes that
use SVC connections.
Required Modifiers for Expand-Over-NAM Lines
ASSOCIATEDEV $nam_process
is a required modifier that specifies the device name of the X25AM line-handler
process or SNAX/APN line-handler process you want to associate with this
Expand-over-X.25 or Expand-over-SNA line.
ASSOCIATESUBDEV #subdevice
is a required modifier that specifies the name of an X25AM subdevice to which the
Expand-over-X.25 line-handler process will bind or the subdevice name of the
SNAX/APN logical unit (LU) used by the Expand-over-SNAX line-handler process.
Configuring X25AM subdevices is explained in Step 1: Add a NAM Subdevice to
the X25AM Line on page 10-7. Configuring a SNAX/APN LUs is explained in Step
2: Add the LUs for the SNAX/APN Line on page 11-8.
Considerations
•
Not all modifiers have associated values (for example, CLOCKMODE_DCE).
•
The modifier_keyword and modifier_value parameters do not add the
specified modifier, or a modifier and its associated value, to the profile used by the
device. Use the ADD PROFILE command to add a modifier, or a modifier and its
associated value, to a profile.