Expand Configuration and Management Manual (G06.24+)

Configuring Multi-Line Paths

Expand Configuration and Management Manual—523347-008

14-16

Line-Logical Device Modifiers

This subsection lists the modifiers for line-logical devices and describes the default

value and range of values for each modifier in the PEXQMSWN, PEXQMNAM,

PEXQMSAT, PEXQMATM, and PEXQMIP profiles. For a complete description of the

modifiers listed in this subsection, refer to Section 17, Expand Modifiers.

X25AM Process Modifiers

You might need to set the following X25AM modifier when configuring an X25AM

process to be used by an Expand-over-X.25 line. This modifier is described in detail in

the X25AM Configuration and Management Manual.

Table 14-3. PEXPPATH Modifiers

Modifier Default Value Range of Values

COMPRESS_OFF

COMPRESS_ON 3

L4CONGCTRL_OFF 3

L4CONGCTRL_ON

L4EXTPACKETS_OFF

L4EXTPACKETS_ON 3

L4RETRIES 3 3 through 255

L4SENDWINDOW 254 187 through 254

L4TIMEOUT 2000 50 through 32767

NEXTSYS

255 0 through 254

OSSPACE 32767 3072 through 32767

OSTIMEOUT 300 10 through 32767

PATHBLOCKBYTES 0 0 through 4095

PATHPACKETBYTES 1024 0 through 4095

PATHTF 0 (not set) 0 through 186

SUPERPATH_OFF 3

SUPERPATH_ON

1. This is a required modifier. The default value is invalid and must be changed.

Note. There are no required modifiers for direct-connect and satellite-connect lines in a multi-

line path.