Expand Configuration and Management Manual (G06.24+)

Configuring Multi-Line Paths
Expand Configuration and Management Manual—523347-008
14-18
PEXQMNAM Modifiers
PEXQMNAM Modifiers
The disk file $SYSTEM.SYSnn.PEXQMNAM defines modifiers for Expand-over-NAM
lines in multi-line paths. Table 14-5 lists the default value and range of values for each
modifier in this profile, if applicable. For modifiers that are mutually exclusive, a check
mark (3) is shown in the “Default Value” column to indicate which modifier is present in
the profile.
INTERFACE_RS422
L2DISCARDONRESET_OFF
L2DISCARDONRESET_ON 3
L2RETRIES 10 1 through 255
L2TIMEOUT 100 20 through 32767
LINEPRIORITY 1 1 through 9
LINETF 0 0 through 186
PROGRAM $SYSTEM.CSSnn.
C1097P00 (direct-
connect)
$SYSTEM.CSSnn.
C1098P00 (satellite-
connect)
QUALITYTHRESHOLD 0 0 to 99
QUALITYTIMER 60 seconds 0 to 77600 (12hrs)
RXWINDOW 7 2 through 15
SPEED 0 0 or 1200 through 224000
SPEEDK NOT_SET 0 through 4,000,000,000
STARTUP_OFF 3
STARTUP_ON
TXWINDOW 7 (direct-connect)
18 (satellite-connect)
2 through 61
Table 14-5. PEXQMNAM Modifiers (page 1 of 2)
Modifier Default Value Range of Values
AFTERMAXRETRIES_DOWN
AFTERMAXRETRIES_PASSIVE 3
ASSOCIATEDEV
1
Any 8-character string
ASSOCIATESUBDEV
1
Any 8-character string
Table 14-4. PEXQMSWN and PEXQMSAT Modifiers (page 2 of 2)
Modifier Default Value Range of Values