Expand Configuration and Management Manual (G06.24+)

Expand Configuration and Management Manual—523347-008
15-1
15
Subsystem Control Facility (SCF)
Commands
This section describes the Subsystem Control Facility (SCF) interface to the Expand
subsystem and provides SCF command syntax. You should refer to the SCF
Reference Manual for G-Series RVUs for general information about running SCF.
Topics described in this section include the following:
•
Overview of the Expand Subsystem SCF Interface on page 15-2
•
SCF and the WAN Subsystem on page 15-7
•
SCF and the SLSA Subsystem on page 15-8
•
ABORT Command on page 15-8
•
ACTIVATE Command on page 15-9
•
ALTER Command on page 15-10
•
ALTER DEVICE Command on page 15-10
•
ALTER PATH Command on page 15-11
•
ALTER LINE Command on page 15-12
•
ALTER PROCESS Command on page 15-21
•
DELETE ENTRY Command on page 15-23
•
INFO Command on page 15-24
•
INFO PATH Command on page 15-25
•
INFO LINE Command on page 15-29
•
INFO PROCESS Command on page 15-47
•
PRIMARY PROCESS Command on page 15-65
•
PROBE PROCESS Command on page 15-67
•
START Command on page 15-69
•
STATS Command on page 15-70
•
STATS PATH Command on page 15-70
•
STATS PATH NODE Command on page 15-76
•
STATS PROCESS Command on page 15-91
•
STATUS Command on page 15-95
•
STATUS PATH Command on page 15-95
•
STATUS LINE Command on page 15-97
•
STOP Command on page 15-105
•
TRACE Command on page 15-106
•
VERSION Command on page 15-111
•
VERSION PROCESS $ZEXP Command on page 15-112
•
VERSION PROCESS $NCP Command on page 15-112
•
VERSION PROCESS LINE Command on page 15-113