Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-5
SCF Commands and Objects
SCF Commands and Objects
Table 15-1 lists the SCF commands and objects that are applicable to the Expand
subsystem.
Sensitive and Nonsensitive Commands
SCF commands are either sensitive or nonsensitive. Sensitive commands can
change the state or configuration of subsystem objects, start or stop tracing, or change
the values of statistics counters; they can cause communications to cease if improperly
used. Nonsensitive commands request information or status but do not affect
operation. The use of sensitive commands is limited to the following user IDs:
•
Members of the super group (group ID 255)
•
Members of the user group that owns the process to which the command is sent
Table 15-1. Expand Commands and Object Types
Object Types
Command
PROCESS
(Line Handler)
PROCESS
($NCP) ENTRY PATH LINE
ABORT X X
ACTIVATE X
ALTER X X X
DELETE X
INFO X X X
PRIMARY X X
PROBE X
START X X
STATS X X X
STATUS X X
STOP X X
TRACE X X X
VERSION X X