Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-6
Wild-Card Support
Table 15-2 lists the sensitive and nonsensitive Expand SCF commands.
Wild-Card Support
Object name templates (wild cards) are supported for most WAN subsystem SCF
commands as described in the SCF Reference Manual for G-Series RVUs.
Time Values
The variable time is used for attributes that require a time interval to be specified. The
syntax of time is
where HH is an integer that specifies hours, MM is an integer that specifies minutes,
SS is an integer that specifies seconds, and hh is an integer that specifies hundredths
of a second. The attribute descriptions in this section provide the range of values that
are valid for that attribute.
In the displays generated by the INFO command, HH is an integer in the range 0
through 24. MM and SS are integers in the range 0 through 60, and hh is an integer in
the range 0 through 99. For example, 5:27.02 is 5 minutes, 27 seconds, and 2
hundredths of a second.
Table 15-2. Sensitive and Nonsensitive Expand SCF Commands
Sensitive Commands Nonsensitive Commands
ABORT INFO
ACTIVATE PROBE
ALTER STATS (without the RESET option)
DELETE STATUS
PRIMARY VERSION
START
STATS (with the RESET option)
STOP
TRACE
HH:MM:SS.hh