Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-35
Expand-Over-IP Line-Handler Processes
Aftermaxretries
is the line state once retries have been exhausted for the line. DOWN means the
line state will be down. PASSIVE means the Expand-over-IP process will issue
passive connect requests.
Example 15-6 shows the display format for a LINE object with the DETAIL option for
Expand-over-IP line-handler processes for IPv4 lines. The asterisk (*) indicates an
alterable attribute.
Example 15-7 shows the display format for a LINE object with the DETAIL option for
Expand-over-IP line-handler processes for IPv6 lines. The asterisk (*) indicates an
alterable attribute.
Note that the IPv6 display format is the same as the IPv4 display format. If the IPv6
addresses are not set, they are displayed as :: (two colons).
Example 15-6. INFO LINE, DETAIL Command, Expand-Over-IP Line-Handler
Processes for IPv4 Lines
-> INFO LINE $IPTAH0, DETAIL
EXPAND Detailed Info LINE $IPTAH0 (LDEV 175)
L2Protocol Net^Ip TimeFactor...... 3 *SpeedK........ NOT_SET
Framesize....... 132 -Rsize........... 3 -Speed........
*LinePriority.... 1 StartUp......... OFF Delay......... 0:00:00.10
*DownIfBadQuality OFF *QualityThreshold 96 *QualityTimer.. 0:01:00.00
*Txwindow........ 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:00:30.00 *Retryprobe...... 19 *Timerprobe.... 0:00:01.00
*Associatedev.... $ZTC02 *LineTf.......... 0 *Timerinactivity 0:00:00.00
*IPVer IPV4
*DestIpAddr 16.107.189.66 *DestIpPort...... 5744
*SrcIpAddr 16.107.188.54 *SrcIpPort....... 5744
*V6DestIpAddr ::
*V6SrcIpAddr ::