Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-42
Expand-Over-ATM Line-Handler Processes
Maxreconnects
is the maximum number of times the Expand-over-ATM line-handler process will try
to connect to the remote system.
AfterMaxRetries
is the line state after all retries have been exhausted for the line.
Timerreconnect
is the time interval the Expand-over-ATM line-handler process will wait for a
successful connection.
Retryprobe
is the number of times the Expand-over-ATM line-handler process will retry the
probe of the remote Expand-over-ATM line-handler process before concluding that
the network is unavailable.
Timerprobe
is the time interval that the Expand-over-ATM line-handler process will wait to
probe the remote Expand-over-ATM line-handler process.
Associatedev
reports the name of the ATM line associated with the Expand-over-ATM line-
handler process.
Associatesubdev
reports the name of the ATM service access point (SAP). The only currently
supported ATM SAP is #IP.
Timerinactivity
is the time interval the Expand-over-ATM line-handler process will wait while the
line is inactive before it requests the disconnection of the network service. This
modifier does not apply to Expand-over-ATM lines.
ConnEp
is the connection endpoint control block address. (This field is for internal HP use
only.)
ListenEp
is the listen endpoint control block address. (This field is for internal HP use only.)
CallType
indicates whether a permanent virtual circuit (PVC), a switched virtual circuit
(SVC), or the SLSA ATMSAP connection option is used.