Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-43
Expand-Over-NAM, Expand-Over-ServerNet, and
Expand-Over-FOX Line-Handler Processes
PvcName
is the name of the permanent virtual circuit (PVC).
LineTF
is the line time factor. LINETF has a range of 0 to 186, with a default of 0 (unset). If
you set LINETF, it overrides the RSIZE, SPEED, or SPEEDK parameters in
calculating the time factor for the line (PATHTF overrides all parameters, including
LINETF). If LINETF is left unset (a zero value), this parameter is not used in setting
the time factor.
Expand-Over-NAM, Expand-Over-ServerNet, and Expand-Over-
FOX Line-Handler Processes
For Expand-over-NAM, Expand-over-ServerNet, and Expand-over-FOX line-handler
processes, the display for a LINE object without the DETAIL option has the format as
shown in Example 15-10. The asterisk (*) indicates an alterable attribute.
Name
is the device name of the line.
Delay
specifies the time interval, in one-hundredth of a second increments, that a data bit
spends on the line during message transmission. The line-handler process uses
the transmission size, the amount of delay before the message can be dispatched,
and the DELAY modifier value to select the most efficient line for data transmission
within a path that consists of multiple line logical devices.
Framesize
specifies the maximum size frame that can be sent in the network; smaller frames
may be sent. The Expand subsystem also uses the FRAMESIZE modifier value to
calculate the packet size. The FRAMESIZE modifier value also determines the size
of the frame buffers.
Example 15-10. INFO LINE Command, Expand-Over-NAM, Expand-Over-
ServerNet, and Expand-Over-FOX Line-Handler Processes
-> INFO LINE $FXKAU
EXPAND Info LINE
Name Delay Framesize *L2Timeout *Associatedev *Associatesubdev
$FXKAU 0:00:00.10 132 0:00:01.00 $ZZFOX