Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-46
Expand-Over-NAM, Expand-Over-ServerNet, and
Expand-Over-FOX Line-Handler Processes
L2Timeout
specifies the time interval that the line-handler process will wait for a response to
request at Layer 2 before retrying. See Time Values on page 15-6 for a description
of the time interval format
Txwindow
reports the number of Expand packets that the line-handler process can send
before receiving a reply.
Maxreconnects
is the maximum number of times the Expand-over-NAM, Expand-over-ServerNet,
or Expand-over-FOX line-handler process will try a connect request after
successfully binding to the NAM interface.
AfterMaxRetries
lists the line state once all retries have been exhausted for the Expand-over-NAM,
Expand-over-ServerNet, or Expand-over-FOX line-handler process. DOWN causes
the line state to be down. PASSIVE causes the Expand-over-NAM process to
switch to PASSIVECONNECTONLY (which supersedes the function of
ACTIVEANDPASSIVECONNECT). This attribute applies to Expand-over-NAM,
Expand-over-ServerNet, and Expand-over-FOX line-handler processes that have
the MAXRECONNECTS modifier set to a nonzero value.
Timerreconnect
specifies the time interval that the Expand-over-NAM, Expand-over-ServerNet, or
Expand-over-FOX line-handler process will wait for a connection request to
succeed. See Time Values on page 15-6 for a description of the time interval
format
Retryprobe
reports the number of times that the Expand-over-NAM, Expand-over-ServerNet,
or Expand-over-FOX line-handler process will retry its probe of the NAM before
deciding that the network is unavailable.
Timerprobe
specifies the time interval that the Expand-over-NAM, Expand-over-ServerNet, or
Expand-over-FOX line-handler process will wait to obtain the status of the NAM
process. See Time Values on page 15-6 for a description of the time interval format
Associatedev
reports the name of the X25AM or SNAX/APN process associated with the
Expand-over-NAM process. For Expand-over-ServerNet line-handler processes,
this field shows $ZZSCL, and for Expand-over-FOX line-handler processes, this
field shows $ZZFOX.