Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-53
INFO PROCESS Command
Message 46
reports whether the reporting of event message 46 to $0 is enabled (ON) or
disabled (OFF). Message 46 is not critical. It means a connection has been made
with the indicated remote system.
Message 47
reports whether the reporting of event message 47 to $0 is enabled (ON).
Message 47 is a critical message. It means that an end-to-end acknowledgment
was not received from the indicated system within the configured Layer 4 timeout
interval.
Message 48
reports whether the reporting of event message 48 to $0 is enabled (ON) or
disabled (OFF). Message 48 is a critical message. It means that a change in
processor status has occurred at the indicated system.
Message 49
reports whether the reporting of event message 49 to $0 is enabled (ON) or
disabled (OFF). Message 49 is a critical message. It means that $NCP has not
received a status message from $NCP at the indicated system for three time
periods.
AutoRebal
reports whether automatic rebalancing of the multi-CPU paths on the system is
enabled (ON) or disabled (OFF).
Next Rebalance Time
shows the time of day of the next scheduled automatic rebalancing of multi-CPU
paths on the system. The time of day is displayed in the following format:
[DDD/]HH:MM:SS
where
[DDD/]
shows the number of days that the specified time of day will be skipped before
the next automatic rebalancing will occur.
HH
shows the hours.
MM
shows the minutes.