Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-54
CONNECTS Option
SS
shows the seconds.
AutoRebalTime
reports the time interval for automatic rebalancing of the multi-CPU paths on the
system. Rebalancing will occur periodically at the time interval shown. The time
interval is displayed in the format described for the Next Rebalance Time
attribute.
Trace File Name
the name of the trace file specified in the SCF TRACE command.
CONNECTS Option
The INFO PROCESS $NCP CONNECTS option displays the systems that are
connected or connecting, and only the entry for which the connection is established. If
the path is a multi-CPU path (superpath), the CONNECTS option displays all of the
paths in the multi-CPU path. It is basically a summary of the NETMAP command, but
shows only the connected entries.
System
indicates the number and the name of the system, or node.
Time(Dist)
these entries show the time factor (TIME) and number of hops (DISTANCE) for
each path between systems in the network and the selected system. A value of inf
(--) (for infinite) indicates that there is no connection to the selected system. Each
row and column entry represents a path connecting the selected system to the
system listed in the leftmost column. (Refer to Routing and Time Factors on
page 18-22 for more information on the TF.) An asterisk (*) indicates the Expand
line-handler process selected for traffic to each known node in the network; this is
Example 15-14. INFO PROCESS $NCP Command, CONNECTS Option
-> INFO PROCESS $NCP, CONNECTS
EXPAND Info PROCESS $NCP, CONNECTS
CONNECTS AT \NODEA (117) #LINESETS=7 TIME: FEB 24,2003 13:55:29
System Time(Dist) Lset:LHname (Ldev) Lset:LHname (Ldev)
82 \NODEB 1(01) 1:$SPATH1 ( 122)& 2:$SPATH0 ( 123)&
3:$SPATH2 ( 121)*
123 \NODEC 4(02) 3:$SPATH2 ( 121)*
160 \NODED 4(02) 5:$IPTAH1 ( 125)+
254 \NODEE 7(03) 1:$SPATH1 ( 122)*