Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-56
LINESET Option
AT \nnn (xxx)
is the name (nnn) and number (xxx) of the system selected.
#LINESETS=nn
is the number of paths (nn) connected through this system.
LINESET n
these entries describe each communications path (LINESET) directly connected to
the selected system. If the path is a multi-line path, the logical device (LDEV)
number associated with each line logical device is also displayed. An “S” next to a
LINESET indicates that it is a member of a multi-CPU path.
NEIGHBOR
indicates the neighbor node that data is transmitted to over the path.
LDEV
indicates the logical device (LDEV) number associated with each line logical
device.
Example 15-15. INFO PROCESS $NCP Command, LINESET Option
-> INFO PROCESS $NCP, LINESET
EXPAND Info PROCESS $NCP , LINESET
LINESETS AT \NODEA (117) #LINESETS=7 TIME: FEB 24,2003 13:55:04
LINESET NEIGHBOR LDEV TF PID LINE LDEV STATUS FileErr#
1 S \NODEB (082) 122 1 ( 1, 334)
1 122 READY
2 S \NODEB (082) 123 1 ( 0, 333)
1 123 READY
3 S \NODEB (082) 121 1 ( 0, 332)
1 121 READY
4 \NODEB (082) 131 -- -- -----
1 131 NOT READY (066)
5 \NODEB (082) 125 3 ( 2, 271)
1 125 READY
6 \NODEF (247) 132 -- -- -----
1 132 NOT READY (066)
7 \NODEF (247) 175 -- -- -----
1 212 NOT READY (066)
2 254 NOT READY (066)
3 256 NOT READY (066)
4 259 NOT READY (066)