Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-72
STATS PATH Command
Reset Time
is the last time the statistics counters were reinitialized.
Sample Time
is the time of the current statistics display.
Current Ext Mem KBytes Used
is the current amount of extended memory used, in KBytes.
Max Ext Mem KBytes Used
is the maximum amount, in KBytes, of extended memory used since the last
statistics reset or line-handler process start.
Number of Known Systems
is the total number of nodes known to this path.
Number of OOS Timeouts
is the total number of out-of-sequence (OOS) timeouts since statistics were last
reset using the STATS RESET command or since the line-handler process was
started. OOS timeouts occur when the OOS timer expires before the next packet in
the sequence arrives. If your system experiences a large number of OOS timeouts,
you might want to increase the OSTIMEOUT value by using the ALTER Command
described earlier in this section.
Ext Mem Allocation Fails
is the number of extended memory allocation failures since statistics were last
reset using the STATS RESET command or since the line-handler process was
started.
QIO Allocation Fails
is the number of QIO memory allocation failures since statistics were last reset
using the STATS RESET command or since the line-handler process was started.
Current QIO KBytes Used
is the current total number of kilobytes of QIO memory space, including overhead
and control data, being used to support messages over the specified path.
Max QIO KBytes Used
is the maximum total number of kilobytes of QIO memory space since the last
statistics reset or line-handler process start, including overhead and control data,
that was used at any one instant to support messages over the specified path.