Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-75
STATS PATH Command
Looping Packets
is the number of incoming packets discarded because they contained the same
source ID as the receiver. This can happen if the underlying transport medium
is looping back packets or if there is a system with a duplicate node number in
the network.
Pckt Too Small/Large
is the number of incoming packets discarded because they contained either
less or more data than expected when the packet was read into the local
buffers.
Misc Bad Packets
is the number of packets received that were discarded for other reasons than
bad source pin, bad dest pin, bad checksum, looping, or out of sequence.
QUEUE DEPTHS CURRENT / MAXIMUM
displays the current queue depths and the maximum queue depths since the last
reset or line-handler process start, for the following queues.
Security Requests
is the current or maximum number of secure requests queued for security
checking.
L3 Transfer
is the current or maximum number of level 3 packets queued for transfer.
L3 Waiting LDONE
is the current or maximum number of level 3 requests awaiting an LDONE
reply from the remote.
L5 Waiting EXT/Shared Memory
is the current or maximum number of level 5 requests awaiting extended or
shared memory.
L4 Waiting Shared Memory
is the current or maximum number of level 4 requests awaiting shared memory.
LEVEL 4 / CONGESTION CONTROL
displays the congestion control statistics for the specified path.
Xmit Timeouts
is the number of transmission timeouts.