Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-84
Expand-Over-ServerNet, Expand-Over FOX,
Expand-Over-X.25, and Expand-Over-SNA Line-
Line Quality
is the line-quality value computed every 500 frames. This value is not alterable.
Line quality is computed using the following formula:
100 * (( TOTAL FRAMES - ERROR FRAMES ) / TOTAL FRAMES)
Line Quality reports a value below 100 only when the result of the formula is
95 or less; that is, when less than 95 percent of the packets are error-free.
Low line quality generally indicates a Layer 2 problem. Refer to Section 21,
Troubleshooting, for Layer 2 troubleshooting information.
Expand-Over-ServerNet, Expand-Over FOX, Expand-Over-X.25,
and Expand-Over-SNA Line-Handler Processes
For Expand-over-ServerNet, Expand-Over FOX, Expand-Over-X.25, and
Expand-Over-SNA line-handler processes, the display for a LINE object has the
format as shown in Example 15-26
.
PPID
is the primary process ID.
BPID
is the backup process ID.
Resettime
is the last time the statistics counters were reinitialized.
Example 15-26. STATS LINE Command, Expand-Over-ServerNet Line-Handler
Processes
-> STATS LINE $SNSLQ3
EXPAND Stats LINE $SNSLQ3, PPID ( 2, 29), BPID ( 3, 58)
Resettime... JUN 09,2000 12:15:33 Sampletime... JUN 09,2000 12:48:11
Bind Aconn Pconn Query Disc
MsgSent 4 4 0 32 0
RepRecv 4 4 0 32 0
MsgTout 0 0 0 0 0
ErrRecv 0 0 0 0 0
LastErr 0 0 0 0 0
Unbind Data Notif Data
MsgSent 4 1399463 MsgRecv 0 1364604
RepRecv 4 1399460 RepSent 0 1364604
MsgTout 0 0 ErrSent 0 0
ErrRecv 0 1 LastErr 0 0
LastErr 0 160
Proc lookup failures 0 Inactivity timeouts 0