Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-92
STATS PROCESS Command
AT { system-list | * }
where
system-list
is ( [ sys-a [ , sys-b [ , sys-c [ , .... ]]]] ).
sys-a
is { \system-name | system-number }.
sys-b
is { \system-name | system-number }.
sys-c
is { \system-name | system-number }.
If the NETFLOW option is chosen, only one system name or number can be
specified.
If the AT option is omitted, the SCF target system name is used.
If * is specified and the LOCALFLOW option is chosen, the aggregate packet
statistics occurring at all accessible systems in the network are displayed.
TO { system-list | * }
where
system-list
is ( [ sys-a [ , sys-b [ , sys-c [ , .... ]]]] ).
sys-a
is { \system-name | system-number }.
sys-b
is { \system-name | system-number }.
sys-c
is { \system-name | system-number }.
This parameter is valid only when the NETFLOW option is specified. It results in
the display of packet statistics for all systems specified in the TO parameter, as
viewed from the system specified in the AT parameter.
If the TO parameter is omitted and the NETFLOW option is specified, the status of
the entire network is displayed, as viewed from the system specified in the AT
parameter.