Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-93
STATS PROCESS Command
Similarly, if * is specified and the NETFLOW option is specified, the status of the
entire network is displayed, as viewed from the system specified in the AT
parameter.
Assume that you have entered the following command:
-> STATS PROCESS $NCP, NETFLOW, AT \N1,
TO ( 2, 4, 5, 6, 7, 9, 10, 13, 14, 15)
The resulting display has the format as shown in Example 15-28 (example display of
$NCP statistics with NETFLOW option):
Sampletime
is the last time that the STATS command was performed.
NETWORK STATISTICS AT \N1 (003)
is the name and number of the system from which the network is viewed.
SYSTEM
lists the system numbers and names that communicated with the system specified
in the AT parameter.
TOTAL LINKS-SENT
reports the total number of link requests issued by this system to a selected system
since the line-handler process was started.
Example 15-28. STATS PROCESS $NCP Command, NETFLOW Option
->STATS PROCESS $NCP, NETFLOW, AT \N1, TO ( 2, 4, 5, 6, 7, 9, 10, 13, 14, 15)
EXPAND Stats Process $NCP, NETFLOW
Sampletime.... JUN 8,2000 20:20:1
NETWORK STATISTICS AT \N1 (003)
TOTAL TOTAL TOTAL TOTAL
SYSTEM LINKS-SENT PKTS-SENT LINKS-RCVD PKTS-RCVD
2 \NODEB 469 1133 102 1132
4 \NODET 0 0 0 0
5 \NODEC 0 0 0 0
6 \NODER 0 0 0 0
7 \NODEA 47 110 8 110
9 \NODEH 6 165 54 114
10 \NODEW 0 0 0 0
13 \NODEX 0 0 0 0
14 \NODET 0 0 0 0
15 \NODE1 0 0 0 0