Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-94
STATS PROCESS Command
TOTAL PKTS-SENT
reports the total number of packets sent from this system to a selected system
since the line-handler process was started.
TOTAL LINKS-RCVD
reports the total number of link requests received by this system from a selected
system since the line-handler process was started.
TOTAL PKTS-RCVD
reports the total number of packets received by this system from a selected system
since the line-handler process was started.
Assume that you have entered the following command:
-> STATS PROCESS $NCP, LOCALFLOW, AT (\NODEC,\NODET,5,6,7,9)
The resulting display has the format as shown in Example 15-29:
Sampletime
is the last time that the STATS command was performed.
SYSTEM
is a list of the system numbers and names for which the aggregate packet statistics
are displayed.
TOTAL PKTS-SENT
reports the total number of packets sent by this system.
Example 15-29. STATS PROCESS $NCP Command, LOCALFLOW Option
->STATS PROCESS $NCP, LOCALFLOW, AT (\NODEC,\NODET,5,6,7,9)
EXPAND Stats Process $NCP, LOCALFLOW
Sampletime.... JUN 9, 2000 20:20:18
AGGREGATE PACKET STATISTICS
TOTAL TOTAL TOTAL TOTAL
SYSTEM PKTS-SENT PKTS-RCVD PASSTRU-SENT PASSTRU-RCVD
2 \NODEC 23784 20874 9876 1132
4 \NODET 14567 32421 7289 28292
5 \NODEW 26735 23451 10002 10627
6 \NODER 31765 26547 8902 9028
7 \NODEA 24567 34582 5901 8976
9 \NODEH 30921 28906 9876 11192