Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-97
Considerations
Trace Status
indicates whether the path is being traced.
Superpath
reports ON if the path is currently a member of a multi-CPU path and OFF if it is
not. The Expand line-handler process at the other end of the path must be
configured with SUPERPATH_ON or the multi-CPU path feature will not be
enabled. The configured value can be displayed using the INFO PATH command.
Line LDEVs
displays the LDEV identifiers for all the lines (up to eight) associated with the path.
Trace File Name
the name of the trace file specified in the SCF TRACE command.
Considerations
You can display the status information for several paths with a single STATUS PATH
command by specifying multiple PATH objects using parentheses as follows:
PATH ( path-name , path-name [ , path-name ] ... )
Examples
The following SCF command summarizes the status on path $PATH1:
-> STATUS PATH $PATH1
The following SCF command gives a detailed display of the status on path $PATH1:
-> STATUS PATH $PATH1, DETAIL
The following SCF command summarizes the status on paths $PATH2 and $PATH3:
-> STATUS PATH ($PATH2,$PATH3)
STATUS LINE Command
The display for a LINE object without the DETAIL option has the format as shown in
Example 15-32:
Example 15-32. STATUS LINE Command
-> STATUS LINE $SWNLCW1
EXPAND Status LINE
Name State Status PPID BPID CIU-Path ConMgr-LDEV
$SWNLCW1 STARTED READY 2, 20 3, 21 A 70