Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-100
STATUS LINE Command
IP Address
is the Internet Protocol (IP) address associated with the SWAN concentrator path
(A or B) being used by this line to communicate with the SWAN concentrator. Each
SWAN path is assigned a unique IP address.
Effective line priority
indicates the effective priority of the line.
Trace File Name
the name of the trace file specified in the SCF TRACE command.
For an Expand-over-IP, Expand-over-ATM, Expand-over-ServerNet, Expand-over-FOX,
or Expand-over-NAM line-handler process, the display for a LINE object with the
DETAIL option has the format as shown in Example 15-34:
PPID
is the primary process ID.
BPID
is the backup process ID.
State
indicates the summary state of the line. The line is either in the STARTED or
STOPPED state.
Path LDEV
contains the logical device (LDEV) number of the path associated with this line.
Trace Status
indicates whether the line is being traced.
Effective line priority
indicates the effective priority of the line.
Example 15-34. STATUS LINE, DETAIL Command, LINE Object
-> STATUS LINE $IPWIL1, DETAIL
EXPAND Detailed Status LINE $IPWIL1
PPID............... ( 2, 32) BPID................. ( 3, 29)
State.............. STARTED Path LDEV............ 212
Trace Status....... OFF Effective line priority 1
Detailed State..... CONNECTED Status READY
Detailed Info... None
Trace File Name.... \NODEA.$DATA00.MIKE.TRCFOX