Expand Configuration and Management Manual (G06.24+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—523347-008
15-111
VERSION Command
The following SCF command initiates a trace of two lines named $LINE2 and $LINE3:
-> TRACE LINE ($LINE2,$LINE3)
VERSION Command
The VERSION command displays the version level of the Expand manager process
($ZEXP), the network control process ($NCP), or an Expand line-handler process.
VERSION is a nonsensitive command.
The VERSION command has the following syntax:
/ OUT file-spec /
causes any SCF output generated for the command to be directed to the specified
file.
process-name
is the device name of an Expand line or path.
Considerations
•
The VERSION command helps in troubleshooting. When reporting a suspected
Expand problem to HP, include the versions of $ZEXP, $NCP, and an Expand line-
handler process.
•
You can display version information for several objects with a single VERSION
command by specifying multiple objects using parentheses as follows:
PROCESS ( object-name , object-name [ , object-name ] ... )
Examples
The following examples show the version information returned for $ZEXP, $NCP, and a
line-handler process.
VERSION [ / OUT file-spec / ] PROCESS
{ process-name | $NCP | $ZEXP }